Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across
$34.99
The Benno Baby Seat Adapter is designed to connect the Yepp Maxi Easyfit Baby Seat with to selected Benno Racks. - Maximum weight of child is 40lbs/18kg
$139.99
Benno Dual leg kickstands help keep the Boost E and Carry On models stable for easier loading of cargo. Integrated roller prevents chain interference with the kickstand. - Fits Benno Boost E and Carry On models only
$139.99
Dual-leg kickstands provide optimal stability for loading and unloading cargo.
$129.95
The Big Agnes Air Core Ultra offers comfort and value. This light and compact three-season insulated pad is designed with a smooth and stable sleeping surface made with durable nylon rip-stop and larger outside tubes to cradle you on top. Warm and highly packable insulation on top and bottom make this air pad lighter on your pack than most in its class. - Durable, lightweight nylon double rip-stop fabric - Proprietary I-Beam construction reduces weight and provides consistent stability and comfort - Aviation grade TPU lamination technology for weld strength and ultimate dependability - THERMOLITE Insulation working with a heat reflective film traps body heat and reflects it back - Antimicrobial treatment inside the pad prevents microorganism growth - High volume valves with micro adjustments make for fast inflation/deflation and easy fine tuning to your preferred firmness - Protective storage sack, replacement valve seal and 3M repair patches included
$12.00
- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle
$50.00
This Premium Leather Saddle Care Kit includes all you need to take care of your Brooks Saddle. This Premium Leather Saddle Care Kit will ensure that your saddle remains comfortable and durable and includes all you need to take care of your Brooks Saddle: a 30ml Proofide tin with Lux polish cream for metal components, a saddle spanner for tensioning and a wood brush to clean the underside of the saddle. 2 cloths are also included. - 30ml proofide - 2 cloths - 15ml Polish lux - Spanner - Brush
$29.99
The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.
$24.00
Built for Si dropouts. A durable kickstand for Cannondale Si dropouts that is stylish and smartly equipped. Where it thrives: Leisurely rides, in town What it's built for: Durability Highlights: - Stylish and sleek - Light and strong alloy construction - Flat/post brake mount compatible
$25.00
• Designed for flat-sided tubes up to 23mm thick • Firm spring prevents movement while riding • Two bracket options to better fit small and large frames
$25.00
• Telescoping leg that offers expanded versatility to fit a wide range of bicycles • Crafted of lightweight and durable aluminum alloy • Equipped with a firm spring that prevents movement while riding • Includes a retro adapter plate
$25.90 - $34.00
- Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Hand painted Japanese designs, Suzu spring-loaded lever arm strike - 55mm in diameter - Made in Japan
$7.99
Clear stick on chainstay and frame protectors.
$70.00
Since the invention of the bicycle there’s been one constant…”How much does it weigh?” Whether it’s a wheelset, frameset, tool set, or whatever else riders get fixated on, weight matters. The Alpine Scale was the first Feedback Sports product and it was the first scale of it’s kind to be built (and patented) specifically to be clamped in a bike repair stand. With unmatched consistency and precision, ability to go quickly between pounds decimal, pounds and ounces, grams and kilograms with double the accuracy of our competitors, this is your hang scale of choice. - Easily clamped in a bike repair stand - Measures in precise 10g (0.02lb) increments - Easily swaps between pounds decimal, pounds and ounces, grams and kilograms - 8.5? (21.5cm) top nylon loop allows to hang from a hook, tree branch or by hand - Accuracy within ±10g (0.02lb) - 55lb (25kg) maximum load - Coated hook protects your frame or components - Zero and Tare functions for clearly and accurately identifying weight differences - Auto shut-off saves battery life - (4) AAA batteries included - 1-Year Warranty
$15.00
Protects the top tube of your bike and your sensitive body parts, should they ever happen to meet. Also great for keeping your bike free from scratches when locking or transporting. As a bonus, it makes portaging your bike far more pleasurable. - Materials: Upcycled Bicycle Inner Tubes, Foam Padding and Hook & Loop - Dimensions: 2 L x 2 H x 16 D in. (51 x 51 x 406 mm) - Weight: 5.9 oz (176 g) Features: - Foam interior to protect your bicycle and you - Adjustment to fit most bicycle top tubes - Hook & Loop mounting - Built in USA
$9.99 - $15.00
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $15.00
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$12.99 - $14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$15.00
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$25.00
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
$40.00
No graphics. No logos. Just a clean layer of protection, available in matte or gloss. Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
This sea gem shines on just about any color bike. Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
Our Cheetah print is guaranteed to make you 20% faster and 100% feistier. The kit is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
Universal kit designed to fit all bikes and sizes. Includes 6 easy-to-trim pieces for top tube, downtube, chainstays, and seat stays. - 10 mil guards protect frame from scratches, chips and shuttle/cable rub - Applying to road or gravel bike? Simply narrow pieces to desired width using scissors or exacto knife - An affordable way to customize your bike with rad designs - Made in the USA
$48.00
Our Kashima gold Geo Deco design is subtly classy, just like you. Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
A modern halftone camo pattern that looks great on dark and light bikes alike! Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
Taste the rainbow, kids! Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$16.99
Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"
$19.99
Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 75mm x 1.5m x 0.2mm (thick), 2" x 60"
$24.99
Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"
$18.00
Hold Fast™ premier keychains with a twist. These all started as last-minute swag for interbike in 2010. They became so popular they had to make them a part of their lineup, and now with limited edition color variations. Features - Hearty “HK” style clip that will secularly attach to belt loops or other gear - Same webbing as our signature straps
$60.00
We understand that your bike is a prized possession and leaving it unattended, even when secured, can be risky. Scout provides unparalleled bike security by combining both an extremely loud 85db bike alarm function with a highly accurate bike finder, using Apple’s ‘Find My’ app. The future of bike security is here. Once armed, any movement of a Scout fitted Bike will trigger the motion-sensitive audio alarm discouraging any further movement and alerting the bike’s owner, both by the sound of the alarm and via a notification that is automatically sent to the owner’s iPhone (when in Bluetooth range). Then in a scenario where a bike fitted with Scout is not where the owner has left it, it can be quickly located using Apple’s network via the ‘Find My’ app. - Compatible with iOS only - Motion-sensitive 85 db audio alarm for immediate deterrence - Can be located quickly using Apple's 'Find My' app - Operated using Knog's iOS app - Mounts to standard water cage braze-ons - Can be mounted under water cage for discretion - Use supplied anti-tamper screws to mount securely - Neon silicone cover provided to advertise security device (if desired) - Arm / disarm using button (within 1.5 m) on app within bluetooth range - LEDs show alarm status & battery charge - USB-C rechargeable with 2 to 6 month battery (pending usage) - Low battery notifications when you have just 20% remaining - Water resistant IP66 rating (wash-proof) - Weighs just 25 grams - USB-C charging cable not included If you want peace-of-mind that you've done everything you can to secure your bike, Scout Bike is an essential piece of kit.
$49.00
Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized
$7.49 - $9.49
The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches. All patch kits come with 2 large, 4 medium and 2 small patches. - 14 mils thick for premium durability - UV resistant – won’t fade or discolor
$10.99 - $12.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
$10.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection
$14.99
You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork. - Fits Fork Stanchion size 32-36mm - Fits forks up to 180mm in travel - Weight: 31 grams (pair)
$26.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection
$40.00
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 2 large and 2 medium patches - 3 small frame protectors - 2 large frame protectors
$15.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be installed directly to bottle cage mounts on frame - Bottle cage and cartridges sold separately
$25.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be separated and installed directly to bottle cage mounts on frame - Includes seatpost adaptor and bottle cage bolts - Bottle cage and cartridges sold separately
$30.00 - $34.99
- Stabilizes bike with double-leg stance - Fits most 26" and 700c bikes - Made of lightweight aluminum - Mounting plate included to fit a variety of bikes
$14.99
- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA
$19.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks
$29.99
The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs. - Sold in pairs - Protects rotors from lubricant and brake oil - Fits all MTB and road rotors - Made from breathable neoprene - Rinse and hang dry after use
$39.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes
$44.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks - Durable, weatherproof 3M adhesive - 8-piece pack is designed to fit most front suspension forks
$99.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes
Page 1 of 3 Next page