A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, removeable internal organizers for digital devices, and a convenient external access pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Waterproof outer pocket. - Removeable 14.2"x10.2" padded laptop/electronics sleeve/organizer. - Removeable 10"x8" padded tablet/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clips + 2 x Axiom keychains. - Independent main compartment and outer compartment compression/cargo straps provide exceptional load control. - Outer straps allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Dual daisy-chain tie-down strips for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap.
Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.
Sturdy and tough for rough conditions. The Sport-Roller Plus made of abrasion-resistant Cordura is designed for lowriders in the front or for the rear rack; it is also the right choice for children's bikes. The handy roll closures are completely waterproof, and provide plenty of room for your belongings. With the QL2.1 system fixing to the rack is quick and easy. - Classical pannier (pair) with roll closure - Can be used individually or as pair as small rear pannier or for the lowrider - Abrasion resistant Cordura fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24 L or 31 L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflectors - Ideal for the use on children's/youth bicycles - Easy to clean inside
Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.
Surly mountain frame bags are designed specifically to fit in the main triangle of your Surly frame. Their mountain bags are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley or some trinket grandma gave you, you know it won't interfere with the mounting straps on the frame bag. Handmade by Revelate Designs in the U.S., these things are made of Dimension Polyant VX 42, a synthetic sailcloth. This stuff is durable, rip resistant, and tightly woven and laminated to make it highly water resistant (but not fully waterproof… Revelate advises using drybags inside if you risk riding in extended downpours or underwater). Compartment access is controlled by quality YKK brand water resistant zippers. The large main compartment has a flexible divider inside, and there's a hidden pocket too. There's also a compartment suitable for smaller items you''ll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are becoming more and more popular. They're light, reasonably voluminous, stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Surly offers them in ten sizes for many of their off-road frames. Buy the bag that matches the size of your frame based on the handy sizing chart. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. Those worried about keeping their frame looking pristine should immediately look for some other type of bag, or figure a way to protect their paint, such as duct tape. Or tatting a top tube doily. For example.
Whether it's bike-packing or riding local trails, Surly's Frame Bags make carrying extra stuff simple. They're light, large, keep the center of gravity low, and keep the width of your cycle the same — making them ideal for singletrack. These bags are made by Revelate Designs in the U.S., and are constructed of Polyant sailcloth, an extremely tough, abrasion resistant, and highly water-resistant fabric. They have two compartments, a large one for bulky items, and a smaller one for food, your phone, or a camera. This model is compatible with Pugsley and Moonlander frames and fastens inside the main triangle with Velcro straps.
$160.00 - $175.00
Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the Ortlieb Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters or from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. The smaller of the two models needs only six centimeters on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full suspension bikes and adjustable seat stems. - Compact, waterproof saddlebag with roll closure - Ideal for bikepacking, alp-crossing, touring - Ideal for small bicycle frames and full suspension mountain bikes - Light weight sturdy PU laminated rip stop nylon - Air release valve to easily purge the bag of trapped air, allowing for tighter compression - Heavy-duty fabric used at the saddle rail mounting location - Heavy-duty hook and loop fasteners with a soft grippy surface ensure slip-free seat post fixation - Sturdy PE inner stiffener - Saddlebag acts as mudguard - Can be mounted to carbon seat posts - 3M Scotchlite reflectors - Suitable for round seatposts with a diameter of max. 31.8 mm - Maximum capacity 3 kg/6.6 lbs.
Ortlieb's spacious Seat-Pack is perfectly suited to help carry your gear on an epic ride. The packing volume varies between 8 and 16.5 liters thanks to the adjustable rolling closure. Regardless of how epic the terrain is, the Seat-Pack always stays in the same shape and in the right position on the bike. This is due to the exclusive Ortlieb welded construction, innovative compression system, and super-sticky seat-post straps.
$150.00 - $160.00
Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.
The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.
The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors
Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension
If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
The Frame-Pack RC Toptube is the solution for everyone who likes to have access to their water bottles while also carrying gear inside the bike frame triangle. This waterproof frame bag with roll closure is also ideal for full suspension mountain bikes, where space inside the frame's triangle is limited by the shocks. Part of ORTLIEB's bikepacking series, this bag with roll closure meets the IP64 standard for waterproofness, meaning your gear is fully protected from an involuntary bath. With its 4 liter volume, the Frame-Pack RC Toptube enables heavy equipment such as tent poles, tools or food to be carried within the frame triangle, maintaining the bike's low center of gravity. The customizable, sturdy, and strong Velcro fasteners enable simple and easy fastening and an uncomplicated installation. The frame pack RC Toptube is made in Germany and PVC-free. Together with the other products from the ORTLIEB bikepacking series, the frame pack RC Toptube forms the ideal equipment for an overnighter, a self-supported race, or your next big adventure. FEATURES: - Reflective logo on both sides of the bag
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
The Portland Design Works Task Basket makes quick work of moving your gear from there to here. With strong and shiny alloy tubing, the Task Basket offers more room than the PDW Takeout Basket and has an updated adjustable bracket that makes it compatible with a wider range of handlebar shapes. The bamboo platform is built to last and look good for years of urban commuting. An integrated U-lock carrying slot is located on the right side of the basket. - Conveniently carry a sixer, takeout, coat, purse, pack or produce - Bracket angle is adjustable and fits 22.0-31.8mm handlebars - Inside of Basket dimensions: 230mm x 305mm x 127mm - Integrated U-lock carrying slot on right side of Basket - Crafted from durable aluminum alloy tubing - Handsome bamboo platform - Tube to mount headlight included - Rack weight: 500 grams - Max load: 5 kilograms - Lifetime PDWarranty
The Porteur House is made to fit Surly's 24 Pack Rack. It uses a system of eight Velcro straps to secure itself to the rack. The strap system is designed such that it will interface with many porteur-style racks with similar platform dimensions. The Porteur House bag is made from durable 1050 Nylon Canvas with polyurethane coating for protection from the elements. It uses a stiff insert in the bottom of the bag to give it shape and keep your stuff protected from wheel-spray. We also include three urethane coated, water-resistant nylon stuff sacks for an added layer of protection in each compartment; 2 front pockets and the large main compartment. The Porteur House bag has two accessory pockets on the front of the bag, each with a light loop to keep you visible and safe. Its main compartment is difficult to describe without using the word huge, and the roll-top closure keeps the rain out and your stuff in. The Porteur House also comes with a shoulder strap so you can take the bag off the bike and use it when you're at the Hallmark store shopping for your little figurines and keepsakes. If you're the kind of person who likes accessories that make your bike infinitely more useful, the Porteur House is for you. With dimensions sitting at 400x270x450mm, fully extended, this bag will be a monolithic figurehead of two-wheeled practicality perched on the front of your bike. The strap system keeps it planted to your rack, and it's more than large enough to bring home the bacon – literally – so go to the store and get some bacon.
PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder
The PDW Gear Belly is a super-stable and easily accessible way to carry gear up front. The sturdy handlebar mounting bracket is designed and manufactured in Germany by Rixen & Kaul and is compatible with 22.0 – 31.8mm straight, riser or flared drop handlebars. Two interior straps hold gear into place. Three exterior straps cinch the Gear Belly nice and tight. All buckles feature cam locks to insure that cargo is extra-secure. A double ended waterproof dry bag is included with every Gear Belly and makes for the perfect fit. Exterior daisy chains create space for last-minute attachments. The sturdy and flexible exterior of the Gear Belly is finished with an easy-to-clean black tarpaulin, so go on and head into the muddiest of adventures! Rated for up to 7kg/15lbs of cargo. - Waterproof roll top drybag straps to handlebar harness - Fits 22.0 – 31.8mm handlebars - Opening at both ends for easier gear access - Durable and abrasion-resistant tarpaulin exterior - Daisy chain for last minute attachments - 15lb load limit
The PDW Gear Belly is a super stable and easily accessible way to carry gear upfront. The sturdy handlebar mounting bracket is designed and manufactured in Germany by Rixen & Kaul and is compatible with 22.0-31.8 straight, riser or flared drop handlebars. Two interior straps hold gear into place. Three exterior straps cinch the Gear Belly nice and tight. All buckles feature cam locks to ensure that cargo is extra secure. A double-ended waterproof dry bag is included with every Gear Belly and makes for the perfect fit. Exterior daisy chains create space for last-minute attachments. The sturdy and flexible exterior of the Gear Belly is finished with an easy to clean black tarpaulin, so go on and head into the muddiest of adventures! Rated for up to 7kg/15lbs of cargo -Waterproof roll-top drybag straps to handlebar harness -Fits 22.0-31.8mm handlebars -Opening at both ends for easier gear access -Durable and abrasion-resistant tarpaulin exterior -Daisy chain for last-minute attachments -15lb load limit
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or hardtail MTB without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts levels independently of the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Seatstays with hook-and loop-straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, KLICKfix / RackTime Snapit or Vario system bags - Max Load: 12kg / 26lb - Clamp for rear reflector - Size: 42 x 33. 2 x 14.5cm / 16.5" x 13.1" x 5.7" - Weight: 960g / 2.12lb
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
$100.00 - $110.00
Your spacious one-click shopping bag: the Bike-Shopper with QL2.1 system can be quickly attached to and removed from your rack. The flexible market and shopping bag remains stable - also on bumpy roads. The adjustable carrying straps allow it to be carried comfortably on your shoulder (adjusted by push buttons) and will not be in the way during biking. A waterproof Quick-Seal closure provides protection from rain. Occasional use of Ortlieb lubricant will keep the closure running smoothly. Further features: internal valuables pocket in size DIN A4| padded carrying handle | lateral 3M-Scotchlite reflectors
The ultimate bike rack! The Ortlieb Rack Three offers you the right solution, whether you're on your way to work, the grocery store, or around the world. One unique advantage of this all-purpose bike rack is its compatibility with all Ortlieb attachment systems. Outfitted with convenient mounting elements for the QL3 and QL3.1 systems, the Rack Three allows you to attach all Ortlieb bags directly to your bike without any other modifications. If you want to use the Rack Three exclusively for your QL2.1/2/1 bags, you can easily remove the attachment elements for the QL3.1/QL3 and thereby create even more space for your panniers. The Rack Three's double-rail design allows you to attach all bike bags with a QL2.1, QL2 or QL1 system to a top level or a lower level. Selecting the lower level gives you the option of simultaneously attaching a bike basket or a Trunk-Bag to the top of your bike rack and expanding your overall stowage space. Rack Three is suitable for bicycles with wheel sizes of 26" and 28". - City and touring aluminum rack with two mounting levels - For wheel size 26"/28" (1 size) * Width of support surface 120 mm - Compatible with all Ortlieb mounting elements (QL1, 2, 2.1, 3 or 3.1 system) - With three integrated QL3/QL3.1 mounting elements on each side - Further mounting components are not required for QL3/QL3.1 bags - Suitable for direct mounting of QL3/QL3.1 products (e.g Back-Roller Urban, Single-Bag, Office-Bag, Downtown Two, Vario, City-Biker, Commuter-Bag) - QL3/QL3.1 lock heads can be easily removed for fixing panniers with QL1, QL2 or QL2.1 system; dummy plugs for borings included - Second mounting level for simultaneous use of pannies on sides and basket or Trunk-Bag on top - Mounting for optional rear light (not included) - Maximum capacity: 30 kg/66 lbs.
The waterproof Saddle-Bag High Visibility ensures that cyclists are highly visible in the dark and in bad weather conditions. The entire fabric is interwoven with a reflective yarn turning the bag into one large reflector when hit by headlights. In addition, the bag features a highly luminous reflector. With a volume of 4.1L the Saddle-Bag offers enough space for a spare tube, repair kit, rain jacket, and food. Thus it is particularly suited for both mountain and road biking being a true alternative to a backpack, or ideal as supplementary bag for touring with lots of luggage. A convenient side effect: Saddle-Bag High Visibility functions at the same time as protection against water and mud, just like fenders. The roll closure is secured to the sides with buckles. The mounting set is available as accessory for a second bike. Saddle-Bag Two High Visibility is one of many high viz products from Ortlieb. It is made of PVC-free, sturdy reflective Cordura fabric, and sustainably produced in Germany. OPTIONAL ACCESSORIES (each sold separately) - Seat mounting for saddlebag (art. code E97) - Strap system (article code F96 E) for fixing to comfort or spring saddles
Page 1 of 8 Next page