The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included
On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included
The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
- Correct fitment of larger 31.8Mm front derailleur to 28.6Mm seat tubes
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
$4.99 - $5.19
- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
Shimano Dura-Ace R9100 Cassette Spacers
$5.00 - $6.95
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system. - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
This is the indexed ratchet needed for converting Campagnolo 11-speed rear derailleurs with a 27-tooth maximum tooth capacity to a 29-tooth maximum tooth capacity to work with 12-29 cassettes.
Race Face Crank Arm Fixing Bolts - For EXI Cranks - M15
Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
$6.99 - $7.99
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains
$7.00 - $10.00
Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
$8.00 - $42.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
$8.00 - $12.00
- Replacement plate for M7000-GS rear derailleur - Choose Inner or Outer
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.
Page 1 of 29 Next page