Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$24.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

$85.99
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers.
- Rear fender expands for custom fit
- Rubber fasteners mount to a variety of frame styles

$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible

$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible

$78.99
Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame.
- Urban fender set
- Sturdy aluminum profile design for urban bikes
- Black U-stay
- Includes accessory parts and stays
- Weight: 568g

$34.99
Front Fender:
• Front fender made of durable all-weather polymer
• Mounts to most suspension and rigid forks
• Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID)
• Extra-wide profile for 3-5" wide tires
Rear Fender:
• Minimalist seat post fender made of durable all-weather polymer material
• Quick-release mount snaps on and off in seconds
• Wide profile design
• Features an adjustable fender angle to fit most bikes
• Extra wide profile to fit 3-5" tires

$16.00 - $17.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use.
- Length: 370mm (14.5")
- Weight: 60g (2.1oz)

$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$72.99
- Color: Black
- Maximum Tire Width: 35 mm
- Fender Width: 45 mm
- Wheel Size: 700c
- Material: Aluminum
- Requires Eyelets?: Yes

$10.89 - $15.08
- Attaches to saddle rails
- Quick and easy to install and remove
- Fat Butt, a wider version for fatbike applications
- Road/CX narrower for road and cross bike applications

$24.99
Easy-to-install rear fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
• 100% recyclable
• Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket
• Hardware included
• Weight: 190 grams / 6.7 ounces

$54.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety.
- 700c x 20-28

$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

$74.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.

$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support.
- Compatible only with disc brakes
- Includes hook-and-loop fasteners and tension rubber

$51.99
S-BOARD
This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included.
S-BLADE
The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted.
- Weight: 206g
- Wheel size: 650B – 28-inch
- Tire width: 30 – 38mm
- Length front fender: 390mm
- Length rear fender: 465mm

$74.99
The best protection with high luminosity! The NIGHTBLADE mudguard for the rear wheel not only provides optimal splash protection, it also ensures greater safety in road traffic thanks to the integrated rear light. The light (with an integrated rechargeable battery) can be removed and charged with a USB connection.
The spoilers, made of softer plastic, serve as edge protectors when getting on or off the bike. The simple quick-release mounting system enables the NIGHTBLADE to be mounted on almost all seat posts using powerstraps, and the 2-joint technology enables them to be optimally adjusted for mountain bikes.

$74.99
The ultimate clip-on mudguard set for road bikes for tire widths up to 25mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. The superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included. Disc brake compatible: Please be mindful of the brake wire.

$59.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE
Fender set made of robust sandwich construction
A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion.
Stylish driving fun with a safety system
With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts.
- Aluminum/plastic sandwich construction
- V-struts with fixed bridges for flexible adjustment
- ASR safety system
- Bottom bracket cutouts
- Made in Germany

$26.99
Stay clean and dry with SKS's Velo 65 Mountain fenders! The universal mounting system easily attaches to a wide range of frames for total coverage from road spray. These fenders fit tires from 37 to 62mm wide and are designed to work with either 26-inch or 29-inch wheels.

$74.99
The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.

$15.08 - $18.43
- Attaches to the down tube using the supplied fasteners
- Quick and easy to install and remove
- Fat Gut Fender, the perfect fit for fatbike applications

$49.99
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray.
- 6061 aluminum blades
- 150mm mudflaps for extra coverage
- Adjustable stainless steel stays create a secure fit on any style recumbent
- Eyelets Required?: Yes
- Release Tabs on front fender for added safety
- Wheel size: 700c
- Fender width: 43mm
- Max tire size: 700c x 35mm
- Weight: 418 grams (rear)

$19.99
Easy-to-install front fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
•100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket
• Hardware included
• Weight: 99 grams / 3.5 ounces

$44.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$120.00 - $125.00
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire.
- Anodized aluminum
- 30mm wide
- Fits bikes with 700 x 23mm tires and fender eyelets
- 454 grams
Page 1 of 4
Next page