Parts

Well, what´s to say about our DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 445mm and 125mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to work perfectly with the shorter travel. - Infinite adjust, 125mm travel - Total overall length: 445mm - But can be easily cut to as short as 375mm - Titanium saddle bolts - Tapered lower tube - Compatible with oval and carbon saddle rails - Sub-zero temperature functionality - Fully user serviceable - 450g Sold as seatpost only—Remote/Trigger's are sold separately.

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE SL and DIVINE SL RASCAL

Service kit for 100 hour service (readjusting play and replacing wiper). Kit includes: - 1x Wiper - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip - 1x Upper bushing

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

The REVIVE MAX 213 follows her slimmer sister and now comes as a 2.0 version with 213mm of infinitely adjustable travel. With the release of the REVIVE 2.0, the extra-long 213mm post required a lot of re-thinking for the whole chassis structure. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strength and stiffness at the same time. - Updated one-piece 3D forged upper tube design for increased stiffness - New CNC actuator lever provides even smoother action - The patented Reset Valve function easily bleeds/resets your "springy" post in just a few seconds - Low friction and super smooth movement, due to less seals and it's non-IFP design - Sub-zero temperature functionality - Short overall length; 213mm post is 582mm long - Compatible with oval and carbon saddle rails - Rotatable foot for extra clearance inside the seat-tube - Fully user serviceable - 690g Sold as seatpost only—Remote/Trigger's are sold separately.

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts. The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear. - Suitable for all BikeYoke dropper posts - Size: 250ml (lasts for several full services)

Squeezy—not just another seat clamp. We never just want to make something, that´s already there. We want to make something different, something better. Unlike other seat clamps, Sqeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seattube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seattube and smoothly secures your seatpost in place. - Material: AL7075-T6, fine-feed CNC finish - Titanium T-25 clamping bolt - Collar-less design for more even clamping force distribution - Three Slip-Stopp installation aids - Only 8g !

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

- Perforated leather handlebar tape - Genuine perforated leather - Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips - Self Adhesive: Yes - Tape Length: 215mm

Comfort was at the forefront of our mind when we started developing The Cloud MK2 Seat. We wanted a saddle that offered comfort and resilient support for week long Enduro events. - Dimensions: 132mm x 275mm - CR-MO rails, moulded plastic base - Weight: 270g

Comfort was at the forefront of our mind when we started developing The Cloud MK2 Seat. We wanted a saddle that offered comfort and resilient support for week long Enduro events. - Dimensions: 132mm x 275mm - Titanium rails, carbon base - Weight: 235g

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

Get Wild with Extra Stiffness and More Clearance These super tough axles are constructed to Rockshox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a 6mm allen key fitting on both ends of the axle. This "Get out of Jail" feature might be pretty handy if you manage to chew one end up rushing to put your wheel on when your mates have already set off. We've all been there.... Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel isn't falling off. Benefit from the increased clearance without a lever in the way getting wacked by trailside debris!

The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core

- LEV INTEGRA'S internally routed cable significantly cleans up the look of your bike. - With shifter cables, brake lines and lock out cables clamped and zip tied to your carbon fiber piece of art, mountain bike frames have begun to look like an IT guy's fantasy. - Clear the clutter while benefiting from legendary LEV technology – now available in 175mm travel.

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

Fits: - 2017 - 2019 Sight Alloy and Sight Carbon - 2019 Fluid FS MKIII - 2018 Optic Carbon - 2016 - 2017 Sasquatch FAT - 2017 Torrent Alloy FS - 2016 - 2017 Torrent HT Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0169

Fits Orbea Rallon 2020 Standard mount only Orbea SKU#: 15430174 Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0151

Updated for the 2021 RockShox Zeb. These finely crafted cable guides are the ultimate accessory for your fork. Fits 2021+ RockShox Zeb and Boxxer forks Supplied with (1) M3 x 10 screw

- 1.1mm polished stainless steel cable - Unit of Measure: 100pcs - Shift Cable Diameter: 1.1mm - Cable Length: 2200mm - Cable Material: Stainless Steel - Shifter Cable Comp.: Shimano/SRAM

- Comfort in an affordable first-class saddle. - Padded with Slow Fit Foam, a memory foam that molds to rider's body. - The foam matrix open cell structure confers increased elasticity and breathability to guarantee a durable and comfortable saddle - Integrated Clip System (ICS)

- 9 speed wide range - 11-40t - Steel spider

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

Bar end plugs are vital for any bike. The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

- Extremely lightweight headset top cap with 5mm integrated spacer - The integration of a spacer is both practical and clean-looking - Also includes black top cap alloy bolt - Weight: 12g

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Replacement piston and seals for Hope disc brake calipers.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Brass compression olive for Hope hydraulic disc brakes.