Filter By:
Riser

$80.00 - $100.00
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel.
- Material: Cromoly steel
- Clamp diameter: 31.8mm
- Width: 780mm
- Rise: 0mm
- Sweep Angle: 11 degrees
- Color: Clear Coat Silver and E.D. coated Black
- Weight: 400g

$75.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem.
Material: CroMoly steel
Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp
Width: 820mm; Can be cut to 720mm
Rise: 83mm
Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep
Weight: 778g including shims
Color: Black

$80.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain.
- 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips
- 34 degree backsweep with a 40mm + / - rise

$100.00
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider.
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR
- Material: Zirconium Doped 7-Series Alloy
- Weight (g): ±270g (15) / ±275g (25)
- Diameter (mm): 31,8
- Rise (mm): 15 / 25
- Length (mm): 780
- Geometry (deg°): 5° up x 7° back
- Finish: Shot peen anodized, decal logos

$100.00
- DH race-tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm

$69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses.
Spank Spoon: the best-priced handlebar on the market without compromise!
- Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality
- Freeride inspired all-mountain geometry makes the bar extremely versatile
- Shot-peening and anodizing enhances fatigue life
- Dial your fit—adjustable to 740mm
- Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

$42.00
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile
- Rock solid in the park or on the trail
- Cost effective upgrade to your cockpit without sacrificing quality
- Shot-peening and anodizing enhances fatigue life even further
- Material: Alloy
- Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm)
- Diameter (mm): 31.8
- Rise (mm):25 / 40 / 60
- Length (mm): 785
- Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm)
- Finish: Shotpeen anodized, laser logos

$40.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead.
- Lightweight and strong 6061-T6 aluminum alloy construction
- Signature 11° back sweep, 6° up sweep, 20mm rise
- 800mm and 750mm width options
- Graduated lines for easy trimming
- 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars
- Weight: 374g
- Note: Rustler bars are not compatible with bar ends

$30.00
With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build.
- Material: 6061 alloy
- Width: 670mm
- Rise: 30mm
- Backsweep: 9°
- Upsweep: 2°
- Clamp diameter: 25.4mm
- Bar-end compatible: yes
- Weight: 399g

$30.00
Just enough rise, and at the right width, Ritchey Trail Rizer is a heavy-duty performer at entry-level pricing.
- Material: double-butted 6061 alloy
- Width: 780mm
- Rise: 20mm
- Backsweep: 9°
- Upsweep: 2°
- Clamp diameter: 31.8mm
- Bar-end compatible: yes
- Weight: 385g

$14.00
- The second version of the Fatbar has undergone a full structural re-design
- In keeping with the demand for wider, gravity oriented handlebars, we have increased the width to 800mm
- Our proven high grade 7050 T6 aluminum and variable gauge taperwall tubing is the key ingredient of the Fatbar
- With careful and efficient use of material, we have massively reduced the weight to a trail-worthy 315g

$35.00
- Manufactured from cold drawn, seamless 6061 material
- Shot peened for increased fatigue life
- Gradual external swaging & internal taper give increased strength & durability without adding weight
- 710mm wide

$40.00
The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel!
- 7/8" (22.2mm) BMX style clamp (so you'll need a BMX stem to use them)
- 4” rise
- 28” width

$20.00
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep

$85.00
- All new DJ/ Slopestyle premier handlebar designed for progression
- 760mm wide
- Featuring our Exclusive Gradient Butting technology
- 31.8mm center bore
- Full bead blast finish for increased durability and fatigue resistance
- 9 degree bend / backsweep and 5 degree upsweep for ultimate comfort
- Available in black ano finish with color graphic options
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 50mm: 323g
- 80mm: 334g

$128.00
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain!
Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat!
- The DEITY All MTN / Enduro / Trail handlebar
- 787mm wide
- The SKYLINE handlebar is our lightest aluminum bar
- Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability
- Custom Gradient Butted 7075 T73 aluminum
- Featuring a 31.8mm bore for lightweight performance and strength
- Features measured cut marks and center alignment detail
- 9 degree bend / backsweep by 5 degree upsweep
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
Sizes:
- 15mm (290gm)
- 25mm (296gm)

$235.00
Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you.
- Unidirectional carbon fiber construction
- Trimmable ends, made easy with graphic markings
- No rider weight limit
- ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle
- 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep
- 825mm wide
- Weight: 288g

$165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package.
- Unidirectional carbon fiber construction
- 35mm stem clamp
- 8 degrees of backsweep with 5 degrees of upsweep
- Trimmable ends, made easy with graphic markings
- Rated to ASTM Condition 4 for extreme off-road riding

$210.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds.
- Compatible with road, mountain, and bar-end controls
- Tested to ASTM 3
- 90mm clamping area to fit Salsa Anything Cradle
- Can be ridden in up or down position
- Unidirectional carbon fiber construction
- Weight: 250g

$12.98 - $15.99
This mid-rise handlebar provides smooth lines and pure comfort
- Black powder coat
- 1"(25.4mm) clamp, 5.25" rise, 27" wide
- Handmade in Maysville, Kentucky

$14.98
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Chrome finish
- Made in the USA
- Weight: 372g
- Lever Compatability: Mountain 22.2mm

$13.98
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Made in the USA
- Chrome finish
- Weight: 526g
- Lever Compatability: Mountain 22.2mm

$19.00
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Chrome finish
- Made in the USA
- Weight: 862g
- Lever Compatibility: Mountain 22.2mm

$75.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width.
- 760mm wide
- Wide to start and trimmable by 30mm each side
- Made from tough 7050 lightweight aluminum
SPECIFICATIONS
- Type: Riser
- Application: XC
- Clamp Diameter: 31.8mm
- Width: 760mm
- Backsweep (degrees): 9

$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface.
- Upsweep: 5°
- Backsweep: 9° (760mm bars)
- Backsweep: 7° (all other bars)

$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Stiff, precise, and super-wide
- Made with tough 7050 alloy
- Descendent geometry from TruVativ's best enduro rider’s input
- Backsweep: 9°
- Upsweep: 5°

$75.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control.
- Stiff, precise, and super-wide
- Made with tough 7050 alloy
- Descendant geometry from TruVativ's best enduro rider’s input
- Backsweep: 7°
- Upsweep: 5°

$200.00
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners.
- Stiff, precise, and width-optimized for enduro, trail and aggressive xc
- Carbon fiber perfection
- DESCENDANT geometry from their best enduro rider’s input
- Signature Troy Lee Designs style

$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Material: Al-7050
- Width: 800mm
- Backsweep: 9-degrees
- Rise: 25mm
- Upsweep: 5-degrees
- Colors: Black

$194.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm, 800mm
- Material (HB): Carbon
- Rise (HB: 25mm
- Type (bar): Riser
- Upsweep (degree): 5
Page 1 of 5
Next page