Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$0.90
- Aheadset preload adjusting bolt
$6.42
- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through
$5.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
$6.00
Use these to shim All-City's cross levers down from 31.8mm to 26.0mm. - Adapts down to fit 26.0mm road, cross, or drop bars - For use with All-City Cross Levers with 31.8mm bar clamp - Sold as a pair
$12.00 - $15.00
Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps
$14.00
• Stainless chromoly steel with high-polish finish • CNC fabrication • 1.29" x 24tpi left hand thread
$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...
$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames
$20.00
All-City Singlespeed Disc Brake Adaptor 
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$22.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$9.99
Extruded and CNC-machined from 6061-T6 aluminum, Box Two™ Stem Spacer Kits feature a lightweight design. Weights range from 0.24 to 0.29 ounces (6.7 to 8.2 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 millimeters. FEATURES - Lightweight Design - Adjustment options from 1 to 20 millimeters - Fits 1" or 1-1/8" Steerer Tubes and Standard 22.2mm Handlebars SPECIFICATIONS - Inner (Ø) 1" or 1-1/8" - Height 1mm, 3mm, 5mm, 10mm 1mm, 3mm, 5mm, 10mm - Material 6061-T6 Aluminum 6061-T6 Aluminum - Weight 6.7 grams / 0.24 ounces 8.2 grams / 0.29 ounces
$14.99
- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height - Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers
$19.99
Box Two Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminum alloy. Weighing in at just 27 grams/0.95 ounces in the 31.8 size, they are as lightweight as tough. The head of the quick-release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Meets or exceeds ENM standards.
$24.99
Cold-forged and CNC machined from 6061-T6 aluminum alloy, Box One Fixed Seat Clamps are tough, lightweight, and exceptionally good looking. Featuring titanium hardware and laser-etched graphics, Box One Fixed Seat Clamps are available in anodized black, blue, red, and silver.
$24.99
Box One™ fork adapters let you run standard "Male" 10mm (3/8" axles) in a fork designed for 20mm axles. - Material 6061-T6 Aluminum
$34.99
- CNC-machined 6061-T6 aluminum with titanium hardware - Zero-friction cam surface treatment ensures smooth lever action - 31.8mm - 27g
$39.99
Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.
$39.99
Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.
$16.00 - $20.00
Benno replacement derailleur hangers. - Benno Derailleur Hanger: eJoy, eScout, 2017-21, Silver
$39.99
Benno replacement Seat Collar for Boost E frames.
Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12
Squeezy—not just another seat clamp. We never just want to make something, that´s already there. We want to make something different, something better. Unlike other seat clamps, Sqeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seattube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seattube and smoothly secures your seatpost in place. - Material: AL7075-T6, fine-feed CNC finish - Titanium T-25 clamping bolt - Collar-less design for more even clamping force distribution - Three Slip-Stopp installation aids - Only 8g !
Page 1 of 68 Next page