Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$20.00
- Oversized exerciser-style platform pedals with molded tread
- Toe straps included
- Fits most exercise bikes
$124.99
$124.99 - $125.00
On Sale
The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021.
- Super slim 12mm for maximized pedal clearance
- CNC weight-optimized trail pedal at 360g per set
- Forged alloy body is shot-peened and anodized for increased durability
- Equipped with hollow taper Chromoly steel axles for unmatched strength
- Sealed bearings and IGUS bushings
- 18 preassembled pins in virtual concavity for ultimate grip
- Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike
- Crank boots compatible axle
$114.99
- Crank Boot Compatible Axles
- Full Anodized Finish
- 12mm Thin—Massive 11x11cm Platform
- Cold Forged Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Chamfered Side Edges for Improved Cornering Clearance
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- 18 Adjustable Pins per Pedal
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$89.99
- Full Anodized finish
- 16-12mm concave platform
- 100mm x 105mm platform
- CNC Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$89.99 - $90.00
- Full Anodized finish
- 16-12mm concave platform
- 110mm x 105mm platform
- CNC Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$130.00
- Wide pedal-to-shoe contact
- Lower platform height for pedaling stability
- Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-molly spindle with 8 mm hex wrench mount
- Sealed mechanism
- 1.0 mm cleat spacer included
- Binding Dual sided
- SM-SH51 Cleat included
- Cleat retention adjuster
- Integrated cage
- Cartridge axle
- Average weight: 438g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
$100.00
The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident.
CLEAN APPEARANCE
- The PD-ES600 features a clean appearance body for use on lightweight road touring bikes.
EASY RIDER ADJUSTMENT
- Easy-to-adjust entry and release tension settings.
SYSTEM ENGINEERED TO WORK TOGETHER
- SHIMANO RT footwear is designed to match the PD-ES600.
$79.99 - $85.00
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings.
- 352 grams (pair)
$100.00
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
- 310 grams (pair)
$39.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance.
- Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
- Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts
- 9/16"
$16.99 - $19.99
One of the most successful and popular pedals, and for good reason.
The original Twisted PC is extremely simple, lightweight, inexpensive, and famously durable plastic-bodied design. Often duplicated but never replicated.
Features:
- High-strength nylon composite
- 16 pins per side
- Traditional looseball bearings
- Chromoly spindle
Specs:
- Width: 98mm
- Length: 89mm
$66.50
There’s no need to choose between clipless performance and platform versatility with the MSW Flip I. Riders can go clipless on the commute or sport clogs on campus. Don’t limit your horizon: these pedals can get you there and back again.
- Wear 2-bolt style cycling shoes or casual flat shoes
- Single side cclipless with platform
- Chromoly, 9/16” spindle, double bushing configuration
- Spindle length: 52.5 mm
- SPD-compatible 2-bolt cleats included, 4° float, 14.6 angle of release
- Adjustable spring tension with tension indicator
- Aluminum pedal body
- Black
$42.75
MSW Thump composite pedals feature a concave shape and tall pins to provide a "just-right" amount of traction--enough for the rigors of riding off-road--but with in-mold nylon pins to keep calves laceration-free on more casual rides. Balance doesn’t have to mean boring!
- Tough nylon composite body with in-mold pins
- Chromoly steel, 9/16” spindles, sealed cartridge bearings and nylon bushings
- Platform size = 118 x 99 x 19 mm
- Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort
- Black
- Made in Taiwan
$52.25
Built to handle the rigors of riding off-road, the MSW Thump composite pedals with replaceable steel pins provide solid traction when the trail gets hairy. The concave shape combined with tall pins provide the perfect balance of comfort and traction for a range of applications meant to expand your horizon.
- Tough nylon composite body with adjustable, replaceable steel pins
- Platform Size = 118 x 99 x 19 mm
- Chromoly steel, 9/16” spindle, sealed cartridge bearings and nylon bushings
- Pin height: 3 mm out of the box. Remove the 2 mm washer under the pin head to convert to 5 mm pin height.
- Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort
- Composite pedal body
- Black
- Made in Taiwan
$89.99
- Reintroduction of the classic MKS design that set the standard for toe clip pedals
- Aluminum body with serrated alloy cage for added grip
- Sealed mechanism with cup/cone bearings
$30.00 - $33.00
- Entry level Track pedals with light alloy body and cage
- Toe clips and straps required
$75.00 - $81.00
Express your personality while boosting your riding enjoyment and safety with the awesome new Geo City Grip featuring LOOK Activ Grip by Vibram. We’ve combined our legendary pedal performance with the expertise of the world’s most famous mountain grip brand to create a fantastic, fun, colorful town and country pedal.
- Technology: Flat pedals + LOOK Activ Grip by Vibram
- Body: Composite
- Traction: Vulcanized Rubber Activ Grip
- Spindle: Chromoly+
- Surface area: 107x103mm
- Weight (pedal): 265g
- Weight (pair): 530g
$90.00
Simple, yet highly efficient. The GEO TREKKING PEDAL is LOOK's two-sided commuter option, allowing you to choose between a ride to work or a quick training session.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Composite
- Traction: Composite studs
- Spindle: Chromoly+
- Platform width: 84mm
- Weight (pedal): 203g
- Weight (pair + cleats): 461g
$125.00
The GEO TREKKING VISION is the ultimate commuter pedal. Two different sides: one flat suitable for any shoes, and the other SPD-compatible for when you take things up a level. A removable light system adds that little extra security: ride to work in your suit and tie, ride home via the trails and side roads.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release Angle: 13°
- Retention: 5-10
- Body: Composite
- Traction: Composite studs
- Spindle: Chromoly+
- Platform width: 84mm
- Weight (pedal): 217g
- Weight (pair + cleats): 490g
- Light included: Yes (x2)
- Light modes: 3 (steady/flash/flash eco)
- Battery Life: Up to 30h (flash eco)
- Light Output: 15 lumens
- Battery: Micro USB rechargeable (cable included)
- Charging time: 50 min
- Beam angle: 180°
$50.00
The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!
$75.00
LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style.
- Technology: Flat pedals + LOOK Activ Grip by Vibram
- Body: Composite
- Traction: Vulcanized Rubber Activ Grip + Composite studs
- Spindle: Chromoly+
- Surface area: 107x103mm
- Weight (pedal): 265g
- Weight (pair): 530g
$85.00
The new LOOK Trail Roc is the maximum grip, full metal pinned pedal for aggressive riding. The distinctive lightweight, low profile design gives centered control and feedback with adjustable pins for ultimate grip. With our championship proven bushing and bearing system on oversized 17mm axles, your next hardcore pedal is here.
- Technology: Flat pedals
- Body: Alloy
- Traction: 12 metal pins per side
- Spindle: Chromoly+
- Surface area: 110x110mm
- Profile: 17mm
- Weight (pedal): 215g
- Weight (pair): 430g
$180.00
What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!
$135.00
Enduro riding is rough on all bike components, and pedals are often the first in the line of fire. The X-TRACK EN-RAGE PLUS pedal features a forged aluminum body for incredible strength. The pedals are SPD compatible and will confidence on the roughest trails thanks to a 13° disengagement angle.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Forged Aluminum
- Spindle: Chromoly+
- Platform area: 664mm²
- Platform width: 67mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 225g
- Weight (pair + cleats): 500g
- Float angle: 6°
- Release angle: 13°
$19.95 - $20.95
- Classic BMX-style platform pedal for all-around use across varied disciplines
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 22.5mm height/105mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 405g
$31.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 15mm height/100mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 345g
$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 520g
$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years
$60.00
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip.
- Premium brass cleats with shims included
- Q-factor: 57mm
- Release angle: 15° / 20°
- Forged 435 Chromoly steel spindle
- 300 series stainless steel spring
- 5-year warranty
- 331g per pair
$89.99 - $100.00
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: A380 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- cleat: premium brass cleats with shims included
- weight: 395g per pair
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
$140.00
Size specific magnesium platform pedal provides optimal shoe/pedal interface.
Details
- Magnesium pedal body for weight reduction
- Optimal surface area
- Minimal body profile - 16mm thin
- Concave pin profile & 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Serviceable, pedal refresh kit found here
Specs
- Adjustable pins: 10 per side
- Body material: AM60B Magnesium Alloy
- Endcap: T15
- Footprint: 114mm x 111mm
- Inner bearing type: Igus Bearing
- Max rider weight: No restriction
- Outer bearing type: Double Cartridge Bearing
- Shoe size: US 10-15 // EU 43-49
- Spindle material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 386g per pair
$169.99 - $180.00
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$49.99
$79.99
38% Off
- Forged alloy platform pedals with a chromoly spindle and replaceable pins.
- Spindle: 9/16-inch
- Sealed cartridge bearings
- 575g/pair
$32.99 - $35.00
- Durable nylon+fiber body
- Heat-treated chromoly spindle
- Molded pins
- Loose ball bearings
- 375g/pair
$15.99 - $20.00
$20.00
Up to 20% Off
• M4 threaded pedal cages mounting holes
• Four windows in pedal body large enough to fit double toe straps
• Polished Body
• Concave footbed
• Single-sided design
$139.00
e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins.
- Lightweight aluminum pedal body
- 22 traction pins
- 9/16"
$54.95
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins.
- Durable composite pedal body
- 22 traction pins
- 9/16"
$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 332g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
$109.00
The CXR is the ultimate performance cyclocross pedal for riders looking for lightweight, durability, and strength. The Posi-Lock retention system allows superior adjustability and easy rapid engagement action. Specially designed larger front retention claw maximizes positive entry in wet and muddy conditions. Cromoly spindles are paired with three precision cartridge bearings for minimal maintenance.
- Weight: 295g
- Body: 6061 Forged Aluminum
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
$169.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm.
- Weight: 468g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Pins: 16 adjustable height grub pins per pair
- Cleat: XPEDO XPT (6° Float)
$79.00
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency.
- Weight: 260g
- Body: Magnesium
- Spindle: CroMo
- Bearings: 2 Cartridge
- Bushings: 1 DU
- Pins: 28 Straight Pins per pair
- Size: 106x100x11 (mm)
$199.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$39.95
Wellgo WPD-823 Clipless Mountain Pedals.
- Includes 98A cleats, Shimano SM-51 compatible
- Dual-spring release/entry tension adjustment
- Four degrees of Rotation
- 9/16"
$64.00
Velo Orange Pedals
- Extruded and CNC-machined aluminum, sandblasted silver finish
- 90 x 60mm platform with two replaceable pins on each side
- Toe-clip compatible
- 9/16"
$60.00
Lots of foot-huggin' lovin and a natural connection to your bike...that's what you get from VP’s all new, dual-concave platform design. VP-Aim was developed with input from both top free riders and local soul riders to deliver the right feeling of control and security at the right price. It’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on.
- 105 x105 x18mm platform
- 9/16"
$80.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability.
- 345 grams
- 9/16" axles
$50.00
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings.
- 385 grams
- 9/16 axle
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
- 406 grams
- 9/16" axles
$25.00
An extremely low-profile composite pedal that can handle just about any type of riding.
- Ultra-durable composite body
- Low-profile body in a slim-lined platform dimension
- 2DU Bushing System with low-friction coating
- Boron axles
- 12 molded traction pins
- Pedal body dimensions: 95 x 72 x 25mm (LxWxH)
- 9/16"
$30.00
Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance.
- 6061-T6 die-cast alloy body construction
- 2DU Bushing System with low-friction coating
- Boron axles
- 14 removable traction pins per pedal
- Pedal body dimensions: 105 x 93 x 25mm (LxWxH)
- 9/16"
$106.00
- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents.
- TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast.
- The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 238g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$158.00
- Aluminum body that is slightly more compact than the SPECIALE 12, yet it offers a stable platform and four adjustable pins for optimal grip.
- The micro-adjustable tension clamping system allows riders to fine-tune the pedal function for their preferred riding style.
- TIME's patented clamping system allows for easy entry and positive, predictable release, as well as a self-cleaning design to ensure reliable performance in all conditions.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 196g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$69.00
- All of the technologies from the rest of XPRESSO line at an affordable price.
- The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost.
- If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$90.00
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle.
- A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal.
- The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$150.00
The Orbitron is the new gold standard for platform pedals. The high grip layout features 16 pins per side on an ultralight alloy body. Beautifully machined axles paired with premium bearings and bushings keep you running for miles to come.
- Body: CNC-machined 6061 Aluminum
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight compact bushings + sealed bearings
- Replaceable pins
$56.00
Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design.
- Body: Reinforced Premium Thermopoly
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight, self-lubricating sealed bushings
- Replaceable pins
- Size: 113mm x 114mm
- Weight: 180g (each)
$41.99
- Forged alloy body and cage
- Oversize oval design
- Chromoly spindle
- Toe clip compatible
- 467g pair
Page 1 of 5
Next page