Pumps, Tools, Maintenance

This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses. Compatible with all SRAM dub cranks, road/mountain/gravel.

Keep those shoes clean! Our Muc-Off Premium Bike Shoe Cleaner makes it easy to get rid of dirt, grime and odors from the outer material of your MTB, gravel or road cycling shoes. It’s a non-toxic, yet super powerful cleaner that’s not only safe for you and your shoes but the environment too. Look fresh, ride rad! It’s a non-toxic, yet high performing neutral cleaner that is effective at cleaning a range of grime and stains without affecting the breathability of materials. Formulated without any harsh chemicals or abrasives to ensure it is safe to use on the wide range of materials used in shoes. It has been tested on over 60+ shoes made from a very wide variety of materials, including: Natural fabrics, synthetic fabrics, technical fabrics, suede, nubuck, leather and other fabrics. Features: - Biodegradable, environmentally friendly, water-based formula - Powerful cleaning performance - Doesn’t compromise breathability - Suitable and safe - specifically designed for bike shoes - Safe on technical fabrics, suede, nubuck, leather and other fabrics* - Perfect for preparing your footwear for fresh waterproofing/re-proofer treatments such as Muc-Off Premium Footwear Shield - Handy sized 250ml spray bottle

- High quality Kraftform Plus screwdriver. - Multi-component Kraftform handle for fast and low-fatigue working. - Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - Holding function - Anti-roll feature prevents any bothersome rolling away at the workplace. - Handle markings for simplified finding and sorting of the tool.

- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations. - The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. - The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. - Holding function (HF) to securely hold the TORX screw on the tool. - Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations. - The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. - The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. - Holding function (HF) to securely hold the TORX screw on the tool. - Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

- Smart mouth geometry significantly expands the range of uses in confined spaces. - Automatically find the respective placement point after every turn. - The slim yet robust ring side is angled by 15° to the tool axis. - The high-quality surface treatment achieves a high and long-lasting corrosion protection. - With Take it easy tool finder: color coding by size.

- Bit socket with 3/8 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

- 3/8'' Bit sockets for the most common TORX and Hex screws - Long bit sockets with extra slim, cylindrical profile zone for low-located couplings (e.g. for bottom bracket ball bearing or stem-fork-clamping) - With extra slim 30mm long profile area - With Take it easy tool finder: color coding by size - Knurling on lower socket end for more grip when used manually Includes: - Robust textile pouch - Torx (TX25, TX30) socket - Hex-Plus (4, 5, 6, 8, 10mm)

- WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling specific applications - Reduces friction on moving components while protecting them from contaminants, water, and corrosion - Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC) in all conditions - Creates smooth, easy component movement for low energy loss - Long-lasting lubrication for extended bearing and component life - High resistance to oxidation and corrosion - Can be used on steel, alloy, Carbon, and titanium

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Precision brake bleeding tools and adaptor kits for Magura brake systems.

Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles. Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

Threaded CO2 cartridge. 26" ATB Tire: 30psi / 2.0 bar 700c Road Tire: 90-100psi / 6.2-7 bar

High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. - For Torx Plus screws - Particularly hard for semi-hard materials - 1/4" hexagon drive - High torque transfer - Size: 40 IP x 25mm

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together

Brake pad spreader tool for Avid Elixir brakes.

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

To adjust preload on Hollowtech II cranksets

High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.

Lezyne's Power Tire Levers are winning the fight against stubborn tires. They're made of a high-strength composite material for excellent strength and durability. Their thin hook ends easily slip under tight beads, while the large handle gives you the leverage needed for tire removal. On the backside, there is a hook to attach the lever to a spoke for added versatility.