Skip to main content

November Special: 20% off All Lighting

IN-STORE ONLY

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools & Maintenance

$666.69
The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.
$666.00
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups. - 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs - 8 installation drifts for standalone bearing installation - Organized in a convenient storage case - Full list of compatible bearing inner/outer diameters found on instructions/parts diagram NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).
$666.00
The standard of the bike industry for over 40 years, the PRS-2.2-2 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Built from heavy-gauge oversized steel tubing, then chrome plated for years of carefree use. NOTE: The PRS-2.2 does not include base. Order #135 Steel Plate Base or FP-2 Floor Mounting Plate. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Easily height adjustable to five positions from 50" to 62" (128cm to 158cm) using our proven lock block system with locking pin - The maximum weight holding capacity of the PRS-2.2 is 120 lbs. (54kg) - Includes #105 cast aluminum work tray
$395.99 $495.00 20% Off
The Feedback Sports Pro Mechanic HD Bike Repair Stand is constructed with oversized, anodized aluminum tubes, a wide and stable base, stronger jaws, and faster closure. It features a working load range of 10-70lbs (max load 100lbs/45kg) and tube diameters to 2.6 inches (6.6 cm). Yet it’s lightweight and portable at 18 pounds (8 kg) and 8” x 43” (21 cm x 115 cm) when folded for travel. - Oversized, anodized 6061 T6 aluminum construction is ultralight, corrosion-resistant and incredibly durable - Oversized knob to fix the position of a 360-degree rotating clamp, providing easy access to all parts of your bicycle - Strong clutch design holds bike at any angle for repairs: 45% greater grip than Pro Elite - New, ratcheting and rotating crank for jaw closure is faster and one-hand operable: closes 60% faster than Pro Elite - Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes - 3-year warranty.
$279.99 $350.00 20% Off
Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.
$207.99 $260.00 20% Off
At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.
$175.99 $220.00 20% Off
The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.
$175.00
Two years in the making, this chain tool is built to stand the test of time. The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. Large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross-compatible with Shimano and Campagnolo pins. The greatest part of the chain tool has to be the interchangeable mid plate. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18-speed cassette in 20 years. The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop. Compatible with 9-12 speed chain, including the new 12-speed chains from Campagnolo and Shimano's XTR 9100.
$166.60
This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip
$156.95
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful! - Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches
$148.00
The CT-15 is a professional-grade tool designed to drive rivets in and out of any bicycle chain, from beefy single-speed half-link chains to the latest 13-speed systems. The unique triple-wide floating shelf ensures that every chain is securely fixtured and centered during use. The ergonomic handle stores spare driving pins as well as a peening anvil used for peening Campagnolo® 11, 12, and 13-speed chains. Built for daily use and fully rebuildable. - Compatible with single-speed bicycle chains including 1/8"", 3/16"" and half-link - Compatible with all 5 to 13-speed derailleur chains, including SRAM® 12-speed Flattop™, SRAM® 12-speed T-Type, Shimano® 12-speed XTR®, and Campagnolo® 13-speed Ekar™ - Includes removable anvil for peening Campagnolo® 11 to 13-speed chains - Includes two spare driving pins (part #2987)
$143.99 $180.00 20% Off
Being a "shade tree mechanic" doesn't mean you should lean your bike against a tree. You paid hard-earned money for your family's bike collection and we've got a budget-conscious, yet feature-loaded bike repair stand that's perfect for the home bike mechanic. The price-point leading 360-degree rotating clamp can position your bike optimally for any work you're planning. Plus, the Recreational Stand leverages a 52-inch (132cm) wide base with rubber-coated end caps for fantastic stability on any surface. And when the service day is done, it folds into a space-saving unit for storage. Add a Tool Tray, Bottle Opener and a Pro Truing Stand for the complete at-home bike shop. - Seatpost clamp features Spinner Knob for quick closure and precision clamping pressure - 360-degree rotating clamp design provides easy access to any part of your bicycle - Fixed clamp height at 55-inch (139cm) - Rubber-coated clamp secures and protects expensive components and beautifully painted frames - Clamp opening up to 1.9-inch (4.8cm) accommodates even the largest diameter frame tubes - Powder-coated steel construction is corrosion resistant and incredibly durable - Stiff 52-inch (132cm) base and rubber-coated end caps create ultimate stability even on uneven surfaces - Total load capacity of 60lbs (27.2kg) accommodates service on most road, mountain bikes, fitness bikes, and electric bikes - Portable and compact construction creates a remarkably small folded footprint of 10 x 4 x 55-inches (25.4 x 10.2 x 139.7cm) - Optional Travel Bag available - At 13.8lbs (6.3kg), moving in and out of storage is no problem - No assembly required - 3-year Warranty
$100.00
Having the right tools and accessories makes riding a bike all the more enjoyable. The MSW Essential Tool Wrap Kit organizes 20 common tools in a tidy travel-ready kit with built-in workspace for knocking out general maintenance and repairs in the workshop or out on the trail. Complete with hex wrenches, tire levers, patch kits, and more, it offers durable construction, a simple yet secure hook-and-loop closure, and freedom to swap in different tools depending on your needs. - Holds 20+ tools at 18" max length in main compartment - Additional capacity in zipper compartment - Hang via grommets, lay flat, or fold it over your repair stand Kit includes: Pedal wrench, Gear pick, Gear brush, Chain whip, Chain tool, Freewheel remover, 7-pc. hex wrench, Box wrench (4, 5, and 6mm), Tire levers (2), Patch kit, Spoke wrench, Philips and flat-head screwdrivers
$29.95 - $86.95
Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.
$80.00
The Muc-Off 8 in 1 Bicycle Cleaning Kit is perfect for any lover of bikes. Complete with Muc-Off's Nano Tech Bike Cleaner, Expanding Microcell Sponge, Soft Washing Brush, Detailing Brush, Claw Brush, Two Prong Brush, Bike Spray and Storage Tub this kit has pretty much everything you need to keep your bike looking nice and tidy. It makes a great Christmas or birthday gift for your bicycle-obsessed friends and family. This kit isn't style-specific either. No matter if you're into Road, MTB, Cyclocross or just getting from A to B, this 8-in-1 kit solves even the most annoying bike cleaning problems!
$74.00
- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application
$72.00
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.
$70.00
Onboard mechanic. For rapid repairs, the STASH system holds a quick-draw Cannondale 10-in-1 mini tool, CO2 inflator spacer and tire plug kit beneath the water bottle. Where it thrives: On the bike, challenging trails What it's built for: Versatility, convenience Highlights: - Fastest access to tools during riding or racing - Compatible with 2021+ Scalpel - Includes holder, Dynaplug, multi-tool and CO2 spacer
$11.00 - $64.00
- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.
$62.50
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
$11.00 - $61.00
Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system
$60.00
- Streamlines bike maintenance with a ratchet that handles both fastening and loosening, offering precise torque adjustments from 2Nm to 10Nm - Includes 10 bits ranging from 2 to 8mm Hex, T20, T25, and PH2, plus an extension rod for difficult spots - Also features an elastic pocket for small items and is housed in a durable 600D Polyester bag with a loop for the Rockband carrier strap - Roll size: L150mm x W55mm x H35mm - Bits: 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / T20 / T25 / PH2 / Extendison - Weight: 190g
$7.99 - $59.99
- For all TRP and Tektro hydraulic braking systems - Non-corrosive mineral oil - Increased Boiling point to 270 degrees C - Decreased viscosity for better fluid flow
$55.00
The Dual Insert Kit is the ultimate stealth-mounted mountain bike tool set. Made up of our Tubeless Insert Kit and Tool Insert Kit, this pair of innovative bicycle tools discretely and securely hide in the ends of handlebars, so they're always close at hand. Includes five high-quality tubeless plugs.
$55.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
$53.00
- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle
$27.01 - $45.65
High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size
$45.00
The Whip-It maximizes function and simplicity. Made from a 12-inch length of stainless steel, it gives you enough leverage to loosen even the most stubborn cassettes. The Whip-It's round handle provides comfort surpassing other flatbar-style chain whips on the market. The icing on the cake is that Abbey's signature tool, the Crombie, stores inside the handle of the Whip-It; this means the two tools you use together get stored together and travel together, creating less clutter in your tool box.
$45.00
Why We Make This You don't want to buy a nice thing and then ruin it by using the wrong tool to install it. The idea of our bottom brackets getting damaged before they ever even spun a pedal was more than we could take. Why You Want It Our precisely made threaded bottom bracket installation tools will fit securely onto Chris King bottom brackets and protect their finish while installing the cup to its correct (and very accurate) torque specification.
$45.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
Page 1 of 6 Next page