Lighting

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

- ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILTY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option - .20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

A compact cycling safety light built around three high-output LED emitters, the KTV Drive Pro 300+ Front light offers up to 300 lumens of output and a highly disruptive Daytime Flash mode. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. The KTV Drive Pro 300+ Front offers convenience and versatility with six output modes, up to an impressive 100-hour max runtime, and waterproof USB-C charging(cable not included). Note: This light is not being distributed within the German market. - Max 300 lumen blast mode / 100-hour runtime in Femto mode - Max 300 lumen blast mode / 100-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - Low-profile mounting with integrated strap hooks - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity

Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)

Bike safety reinvented, Vya Pro Smart Lights provide an uncompromising powerful SafePulse beam with convenience commuters love. Smart auto-on/off sensors are a true game changer – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in to remain on at stoplights. Whereas Vya taillights will always pulse for effective rear visibility, the smart headlight senses ambient light and knows to pulse in the daytime but remain steady at night – automatically adjusting to the safest riding mode possible. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and efficient. For the busy commuter that wants premium visibility but a lighting setup that removes in seconds, the smart Vya Pro Commuter Combo is the perfect solution. Features - 200 Lumen Headlight (250 SafePulse) & 100 Lumen Taillight optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Powerful custom optics to provide a punchy beam visible over 2KM in daylight - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 200 (high), 250 (SafePulse) - Runtime: 120 min (high), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

Engineered with incredible night-piercing power, the Metro Pro™ 1100 unleashes an extraordinary 1100 lumens right through the darkness with exceptional brightness and clarity. Its cycling tuned optics enables an extra-wide, long-range output to maximize your line of sight. Not only limited to night, the Metro Pro’s DayLightning® mode makes you stand out in broad daylight to give you the advantage anytime and anywhere you ride. Patent pending. - Powerful 1100 lumen output with 9 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - Triple Flash - Zoom - DayLightning® - Walking mode) - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - Micro USB rechargeable, internal battery lasts up to 100 hours - Low battery indicator alerts you when a charge is needed - Rugged, water-resistant design - Side illumination ports highlight your presence to nearby motorists - Light activation lockout prevents accidental light activation - Locktite™ quick-release handlebar mount keeps the light securely fastened to the handlebar RUN TIMES: - Boost: 1:00 hrs - High: 1:30 hrs - Medium: 3:00 hrs - Low: 10 hrs - SteadyPulse®: 4:00 hrs - DayLightning®: 14 hrs - Triple Flash: 22 hrs - Zoom: 4:00 hrs - Walking: 100 hrs - CHARGE TIME: 2:30 hrs (depending on charger used) - MOUNTING: Handlebar - BATTERY: Built-in Li-ion Patent pending. *Features and specs are subject to change without notice.

Amber side safety lights that are as cute as a button The Button Blinky Amber safety side lights are the perfect way to complete 360 degrees of visibility on your bike. The strong rubber straps are designed to mount to multiple points on your bike, including your fork, stem, top tube, down tube, seat post and rear stays. The little lights have two modes and offer run times of up to 85 hours on replaceable CR2032 batteries. These little lights are brilliant, easy to mount, and cute as a button!

250 lumens packed into an unbelievably compact form, the all-new Hypershot 250 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 250 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 250 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

Lezyne's Zecto Drive Rear is a low-profile, high-visibility light with three ultra-bright LEDs. It delivers up to 80 lumens with five output options and holds up to daily use thanks to a lightweight, durable composite matrix body with machined aluminum faceplate. Intelligent Power Indicator displays battery life and provides side visibility. Convenient Micro-USB rechargeable design. Versatile 2-in-1 Clip-On System straps to bars or clips to loops.

Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe

Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.

The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

When you absolutely, positively need to be seen, day or night, rain or shine, trust CatEye's brightest rear safety light. The ViZ450 features 5 LEDs, 300-degree visibility, OptiCube lens technology, and makes sure you stand out with the power of Daytime Hyperflash mode. - 5 LEDs (450 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (40 lumens):5 hrs - Flashing (40 lumens):65 hrs - Group Ride (130 lumens):10 hrs - Daytime Hyperflash (450 lumens):14 hrs

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

Quick-release bar mount for Imjin or Nip lights. Use as a replacement for stock mount or utilize as a second mount if you switch the Imjin between multiple bikes. Included installation wedge helps to position light in perfect position.

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems. Please note: Style and color may vary SYSTEM COMPATIBILITY - Pro 2200 Race - Pro 1800 Race - Pro 1400 Race - Pro 1200 Race - MiNewt Pro 770 Enduro - MiNewt Pro 750 - TriNewt - TriNewt Wireless - MiNewt Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The ultra-sleek Dash™ 520 headlight and Hotshot Micro™ 30 tail light combo set delivers superior lighting for night and day road cycling. Fire up an intense 520 lumens forward and 30 lumens backwards to maximize your line of sight and coverage. Not only limited to night, the Dash™ and Hotshot Micro™ both feature DayLightning® mode with lightning-like flashes to make you stand out in broad daylight. Every bit the road cyclist’s light set, its low profile flexible mounts are designed for most standard and aero styles. (patent pending) Dash 520 USB: - Powerful 520 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Quad LED Steady - Quad LED Flashing) - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your way at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 79 grams - Side illumination ports highlight your presence to nearby motorists - Versatite™ flexible mount conveniently attaches to most handlebars including aero bars Hotshot Micro 30 USB: - Powerful 30 lumens flashing - Built-in 24/7 Safety Technology® gives you a powerful selection of 5 day and night modes (Steady Beam - DayLightning® - Zoom - SteadyPulse® - Group Mode) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - USB rechargeable - Enhanced Cycling Optics™ scatters the beam to maximize your visual presence from a wider angle - Low profile, compact size weighs only 35 grams - Water-resistant design - Low battery indicator - Versatite™ flexible mount conveniently attaches to most seat post and seat stays including aero styles Patent pending. *Features and specs are subject to change without notice.

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Elevate your cycling experience with the Micro Drive 800+ Front light. Whether you ride recreationally or in challenging conditions, this is your visibility solution. With eight LEDs, this light is engineered for maximum efficiency and runtime, providing the best beam pattern for optimal visibility in even the most challenging conditions. Six different output modes, including Daytime Flash, 800 lumens max output, and a 35-hour runtime on femto mode, ensure you're prepared for any circumstance. The light's waterproof USB-C charging(cable not included) and CNC-machined aluminum construction with cooling fins provide durability and convenience. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. The fresh optical design, optional GoPro mount compatibility, and Infinite Light Power Pack+ compatibility offer versatility and enhanced performance. Customize your lighting experience for your unique lifestyle with the Micro Drive 800+ Front light. - Max 800 lumens / 35-hour max runtime - Max 800 lumens / 35-hour max runtime - Waterproof USB-C charging port with charge indicator - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. FEATURES: - High power rechargeable headlight (500 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - Battery indicator mode flashes red when less than 20% - Lightweight and compact polycarbonate body - USB rechargeable (Micro USB cable included) - Mode memory function - 4 light modes: High, Low, Daytime HyperConstant, Flashing - Secure FlexTight bracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 500 lumens | 1.5hrs - Low mode: 250 lumens | 3.5hrs Dimensions/Weight: - 32 x 102 x 33 mm - Weight: 95 grams (light unit and battery) Light source: - High intensity white LED X1 Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 4-4.5hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%)