Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Pumps/Inflation

$10.99 - $15.00
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$80.00
High Quality, Compact, and Easy-to-Use CO² Threaded Cartridges. - High Capacity 25 Gram Threaded Cartridges - Fits All CO² Pumps That Accept 16G Threaded - Small, Compact, Easy To Use - 1 Box / 20 Cartridge Count
$37.00
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
$69.00
The new Prestaflator Digital is made possible by Prestacycle's new Rapid Response Digital Gauge. During inflation, the gauge is capable of showing immediate changes in pressure, enabling fast inflation – now with supreme accuracy. The gauge uses highly accurate, non-wearing circuitry for pressure readings, so it does not wear-out or loose accuracy like traditional Dial gauges. Highly accurate readings are across the whole range, making this tool excellent for Fat Tire, Cyclocross, MTB as well as Road Bikes. Easy Tool-less replacement of the two CR2032 batteries (included).
$5.00 $6.00 17% Off
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$9.00
Portland Design Works' 16 ounce Co2 Cartridges are threaded, work with most Co2 inflators that require threaded cartridges, and are food-grade so they're completely gentle and safe for your valves and tubes.
$15.00
Our 38 gram threaded CO2 cartridges will fill up your Plus or Fat bike tires with the Fatty Object CO2 inflator. A 38 gram CO2 cartridge will fill a 26x4.8" tire to 6-7psi or a 29x3.0" tires to 20-22psi. They're also food grade, which means they're clean on the inside and won't gunk up your inflator or tire valve.
$29.00
The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz)  - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty
$22.00
It's a CO2 inflator! Constructed of durable alloy and composite, this price-point CO2 inflator is sure to save you on the side of the road. The oversize control knob makes for easy regulation of air flow. Comes with two 16g CO2 cartridges and a foam sleeve to protect your fingers from the frosty cartridge. - Oversize control knob regulates CO2 flow - Durable composite and alloy construction - Includes 2x 16g CO2 cartridges + 1 foam sleeve - Presta and Schrader compatible
$34.00 - $35.00
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty
$19.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 
$26.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. It includes a control knob to keep you in charge of the pressure and a threaded Co2 cartridge with a neat leather sleeve. And, it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)  - Leather sleeve length: 55 mm (2.25") - Weight of inflator with cartridge: 80 g (3 oz)
$22.00
Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs. - Presta valve compatible - Control knob easily regulates CO2 flow - Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes - Lifetime PDWarranty
$78.00
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
$15.00
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
$45.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
$55.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
$175.00
With a conjoined secondary chamber that can be manually pressurized, Lezyne's Digital Pressure Over Drive floor pump is capable of conveniently seating tubeless tire systems. An integrated foot-lever opens and closes the chamber; when the chamber is full (Max. 220psi / 15 bar), flipping the lever down creates a powerful, continued blast of air that can seat road, mountain and plus-sized tubeless setups. This provides tubeless users an effective alternative to air compressors and CO2 units. Furthermore, a highly accurate digital gauge is incorporated into the pump for precision inflation when filling low- or high-pressure tires. Constructed from high-grade steel and aluminum, the Digital Pressure Over Drive is extremely durable and features an extra-long, nylon-reinforced braided hose. The innovative ABS2 chuck is both Presta- and Schrader-compatible and the system can also be used as a regular floor pump.
$80.00
The Digital Shock Drive features incredibly compact and lightweight aluminum construction with a cleverly integrated hose that threads into the handle when not in use. Highlighting the Digital Shock Drive is the ultra low-profile digital gauge that’s built into the pump’s aluminum body. This innovative design keeps the pump extremely compact, yet still provides a highly accurate measurement of air pressure. It provides up to 350 psi (24 bar) and features a zero-loss chuck design, which unthreads from the shock after the valve pin seals itself. This is the ultimate shock pump to throw in a pack and use for trailside adjustments.
$55.00
Lezyne's Micro Floor Drive HP is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.
$55.00
Lezyne's Micro Floor Drive HV is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg, high-volume barrel and aluminum construction make it easier than ever to pump up to maximum pressure of 90psi and get back on the trails. You'll also appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility.
$66.69
The Micro Floor Drive XL is a portable hand pump with floor pump capabilities developed to efficiently inflate fat bike tires. It features a CNC-machined aluminum construction, which keeps its weight to a minimum without sacrificing durability. An extra-large, high-volume barrel produces large amounts of air with each pump and can inflate tires up to 35 psi (2.4 bar). A long, integrated hose and a stainless steel foot peg improves pumping efficiency and reduces trailside downtime. The ABS Flip Chuck is compatible with both Presta and Schrader valves and threads into the pump’s base for optimal storage.
$100.00
The Steel Digital Drive is a high-performance bike pump featuring a rugged steel barrel and piston with machined aluminum base. NEW: Highly accurate, easy-to-read 3.5" (88.9mm) digital gauge. - Steel barrel and piston with machined aluminum base - Precision 3.5-inch digital gauge (220 psi / 15 bar) - Varnished wood handle - Extra-long nylon-reinforced braided hose with aluminum couplers - ABS1 Pro chuck
$22.00
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
$38.00
Stay pumped. Combine the speed and convenience of CO2 with the trusty safety-net of a traditional pump for a sleek, integrated, and stowable package. Where it thrives On the bike, the open road What it's built for Versatility, efficiency Highlights - Pocket-sized (7.2"/ 18cm) mini pump with built-in CO2 inflator / quality aluminum construction with ergonomic CNC-machined surface - Dual-chamber telescopic design maximizes volume for easy inflation up to 100 psi (6.9 bar) - Dual-head design with dedicated outlets for presta valve and CO2 / 16 gram CO2 cartridge included
$48.00
Stay pumped. Packed with clever features that prioritize convenience and functionality, and gets large volume off-road tires to the correct pressures quickly. Where it thrives: On the bike, challenging trails What it's built for: Efficiency, control Highlights: - Quality aluminum construction with ergonomic CNC-machined surface / bottle cage mount / length: 9.4" (24cm) - Retractable flexible hose, fully sealed weatherproof internals / lever lock pump head compatible with all bicycle tire valves - Maximized air volume design for easy inflation up to 60 psi (4.1 bar)
$50.00
Stay pumped. An incredibly easy-to-use gauge is paired with a stable base and durable body for an ideal go-to pump for inflating any bicycle tire. Where it thrives: In the garage What it's built for: Efficiency, Stability Highlights: - Tough steel base, durable barrel / extra-large 5" (130mm) gauge offers increased readability - Recommended pressure ranges help select suitable tire pressure - AutoSelect head adjusts to Schrader and Presta valves
$45.00
Fix it fast. Contains everything needed for quick, hassle-free puncture repairs, while providing multiple on-bike mounting options – just add a tube of choice. Where it thrives: On the bike, challenging trails, the open road What it's built for: Fixing, versatility Highlights: - Twist-controlled micro Co2 inflator with built-in non-pierce Co2 cartridge storage - Tough, lightweight PriBar tire levers, two 16g Co2 cartridges, and molded silicone insulator sleeve included - Stretchy, non-abrasive polyurethane straps fit any bike and won't absorb mud and water (2x sizes)
$3.50
Threaded CO2 cartridge. 26" ATB Tire: 30psi / 2.0 bar 700c Road Tire: 90-100psi / 6.2-7 bar
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
$57.95
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
$4.95
Mounting Kit for Mountain Morph and Turbo Morph G.
$4.95
Replacement parts for JoeBlow Pro and JoeBlow Booster.
$49.95
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
$59.95
Air up your mountain bike tires in a hurry with Topeak's Joe Blow Mountain floor pump. Its large diameter steel barrel, sturdy composite base and oversized padded handle make inflating high volume tires an easy task. For versatility, its double-sided TwinHead pump head tightly grips both Presta and Schrader valves. And, you'll appreciate the easy-to-read gauge.
$149.95
The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.
$59.95
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
$89.95
Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!
$99.95
This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.
$99.95
This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.
$149.95
An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb
$129.95
The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb
$109.95
An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb
$29.95
Topeak's Micro Rocket AL is a small pump that packs a punch. Small in stature, this 6.3-inch pump is a giant in tire inflation. It utilizes a compact, single-action design to blast tires up to 160 psi.
$23.00
Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.
$37.95
Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.
$39.95
Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.
$44.95
The smallest Morph is still big on features. Fills both fat and skinny tires with ease, fold out foot pad for hassle-free inflation. Includes in-line gauge for perfect inflation every time.
$4.95
Mounting kit for Mini Morph and Road Morph G.
$29.95
Big volume barrel while Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 60 psi / 4 bar - VOLUME PER STROKE: 81.4 cc (pull + push) - SIZE: 22.3 x 4.6 x 3.4 cm / 8.8” x 1.8” x 1.3” - WEIGHT: 126 g / 4.44 oz Added Features - Dual-action pumping head - Side mount bracket
$44.95
Larger barrel version pumps more air volume for MTB riders. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 82 cc (pull + push) - Side mount bracket secures to water bottle bolts - Size: 25.3 x 4.6 x 3.4cm / 10” x 1.8” x 1.3” - Weight: 152g / 5.36oz
$44.95
Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz
$54.95
The Mountain TT G Twin Turbo pump has a large, integrated 1-1/8"-diameter easy-to-read analog gauge. It fills both large-volume fat bike tires and higher pressure MTB tires with ease. TwinTurbo technology uses both strokes to compress air to deliver high-pressure output and saves time and effort. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 91cc - Added Features: Side mount bracket - Size: 25.3 x 4.9 x 4cm / 10” x 1.9” x 1.6” - Weight: 227g / 8oz
$42.95
Mountain TT Twin Turbo pump fills both large volume fat bike tires and higher pressure MTB tires, as well as gravel bike tires with ease. TwinTurbo technology uses both strokes to compress air to deliver high pressure output and saves time and effort. Integrated dust cap keeps pump head clean and thumb lock lever ensures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 120 psi / 8 bar - VOLUME PER STROKE: 90.9 cc - SIZE: 22 x 5 x 4 cm / 8.7” x 2” x 1.6” - WEIGHT: 192 g / 6.77 oz Added Feature - Side mount bracket
$34.95
Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.
$20.95
Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.
$29.95
Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.
$64.95
A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz
$67.95
It's the Topeak PocketShock DXG’s big brother, the PocketShock DXG XL! This precision fork and shock pump features an extended barrel and offers quick inflation and an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. The flexible hose takes stress off the valve stem when pumping, protecting your expensive fork and shock fittings. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates the common problem of air loss when disconnecting.
$16.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Page 1 of 4 Next page