Lighting

Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.

Updated and more secure clothing clip for mounting CatEye safety lights.

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

End Plug For Femto USB and Stvzo Femto USB Front

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

- Rack mount bracket only - Fits TL-L225 taillight

- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists

Quick mount headlight bracket - Fits 25.4 – 31.8mm handlebars

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot

Quick mount helmet bracket for headlights

Quick mount seatpost tail light bracket - Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light

- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light

Custom CNC-machined aluminum and Composite Matrix handlebar adapters replace LED bike light mounts, making them GoPro-compatible mounts. LED Compatibility: CNC-Machined Aluminum Mini 400XL, Hecto 500XL, Micro 600XL, Micro Pro 800XL, Lite 1000XL, Fusion 500+, Fusion Pro 600+, Micro 800+, Micro Pro 1000+, Lite 1200+, Hecto StVZO 40, Hecto StVZO Pro 65, Lite StVZO Pro 115, Power StVZO Pro 115+, Hecto StVZO 230+, Micro StVZO 300+, Hecto Pro StVZO 400+, Macro StVZO 500+, Super StVZO 600, Macro 500+ Reverse, Deca StVZO 1250. Not compatible with Zecto Drive, Classic Drive, Strip Drive, KTV Drive or Femto Drive lights. Composite Matrix Mini 400XL, Hecto 500XL, Classic 500, Classic 700XL, Micro 600XL, Micro Pro 800XL, Lite 1000XL, Macro 1300XXL, Super 1600XXL, Mega 1800i, Classic 500+, Classic XL 700+, Macro 1400+, Super 1800+, Mega 2400+ Hecto StVZO 40, Hecto StVZO Pro 65, Lite StVZO Pro 115, Power StVZO Pro 115+, Power HB StVZO 500, Macro 500+ StVZO Reverse, Deca StVZO 1250. Not compatible with Zecto Drive, Strip Drive, KTV Drive or Femto Drive lights. Limited StVZO Compatibility StVZO LED Bottom Mount (LED above handlebar). StVZO Reverse Mount applications are limited to specifically designed models and they are marked as such. This product is not affiliated with, endorsed by, or in any way associated with GoPro Inc. or its products and services. GoPro, HERO, Session, Karma, and their respective logos are trademarks or registered trademarks of GoPro, Inc.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

ABS Adapter that allows you to fit Trace and TraceR lights to action camera brackets such as GoPro, AEE, Sony and many others, giving you a flexible mounting solution.

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

Adapter fits the range of helmet lights to action camera brackets such as Go-Pro, AEE, Sony and many others. Works with Zenith, Diablo SYNC, Diablo, Axis, Joystick, Link Plus DB, Link DB

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

3 LED tail light The Blinky 3 is a classic cycling safety light. The iconic and durable kidney bean design has been keeping bikers visible for two decades. The 3 LEDs are super efficient and last for over 100 hours on flash mode.

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

Cat Eye Mounts & Brackets can be added to multiple bikes, allowing any bike to be quickly adapted for nighttime rides. - Center-mount bracket uses the fender mount location at the fork crown - Keeps handlebars clear of clutter and lowers light to provide better contrast for the road surface - Compatible with AMPP1100 / 800, VOLT1700 / 1600 / 1200 / 800 / 700 / 400 / 300 / 200 / 100, Nano Shot+, Nano Shot, Econom Force, Econom, Uno, Jido, and HL-EL135

- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

This saddle rail bracket is designed to be used with the Flare and TraceR, this product will fit any standard rail design saddle.

- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment

The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.

Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

Multi-use LED safety band By day, it’s a mild-mannered pant strap but when the sun goes down it transforms into the BRT Strap! The BRT stands for BRIGHT and our little LED safety band can be used as a pant strap, arm band or dog collar. Strap it to anything and you’ll be sure to get noticed whether you’re on your bike, out for a jog or taking Rover for an evening stroll.

Cute combo set that lights you up The Blinky Safety Set is a brilliant combo set in a super compact package. They clip on to your bike bag or mount to your bike. Where ever you attach them, they get you noticed when you are out and about when the sun goes down.

Amber side safety lights that are cute as a button The Button Blinky Amber safety side lights are the perfect way to complete 360 degrees of visibility on your bike. The strong rubber straps are designed to mount to multiple points on your bike, including your fork, stem, top tube, down tube, seat post and rear stays. The little lights has two modes and offer run times of up to 85 hours on replaceable CR2032 batteries. These little lights are brilliant, easy to mount and cute as a button!

The perennially popular Spok is a commuter classic. It’s the bicycle safety light that’s sleek, compact and super functional. It straps to everything including bars, helmets and hubs. It’s a great light to have for those unexpected night rides because it keeps you illuminated no matter where you mount it.

Fast-mounting safety light The perennially popular Spok is a commuter classic. It’s the little bicycle safety light that has a fun design that’s super functional. It straps to everything including helmets, hubs, saddle rails, and seat posts. It keeps you illuminated no matter where you strap it on.

Others out on the roads and paths will see you when Sunlite's HL-L380 Headlight is on your bike. It sports 3 bright Nichia LEDs, steady and flashing modes, and 200 hours of run time! A quick-release handlebar mount is included, too.

- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 35

- 80-lumen COB chip LED headlight - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Safety bike lights that are cute as a button The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high-output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount, and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

- Fits 25.4 to 35mm handlebars. - Wide range compatibility designed for standard and larger diameter handlebars. - Easy to install and stays secure in rough terrain. - Compatible lights: Ranger Endurance, Ranger, Metro Pro, Metro Plus, Metro, Streak - Durable and convenient. - Premium plastic for strong durability. - Quick release feature makes removing the light quick and easy. - Designed, engineered, and assembled in the USA to ensure top-quality mounts for your light.