Full Parts Catalog

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE SL and DIVINE SL RASCAL

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

The REVIVE MAX 213 follows her slimmer sister and now comes as a 2.0 version with 213mm of infinitely adjustable travel. With the release of the REVIVE 2.0, the extra-long 213mm post required a lot of re-thinking for the whole chassis structure. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strength and stiffness at the same time. - Updated one-piece 3D forged upper tube design for increased stiffness - New CNC actuator lever provides even smoother action - The patented Reset Valve function easily bleeds/resets your "springy" post in just a few seconds - Low friction and super smooth movement, due to less seals and it's non-IFP design - Sub-zero temperature functionality - Short overall length; 213mm post is 582mm long - Compatible with oval and carbon saddle rails - Rotatable foot for extra clearance inside the seat-tube - Fully user serviceable - 690g Sold as seatpost only—Remote/Trigger's are sold separately.

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

Get Wild with Extra Stiffness and More Clearance These super tough axles are constructed to Rockshox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a 6mm allen key fitting on both ends of the axle. This "Get out of Jail" feature might be pretty handy if you manage to chew one end up rushing to put your wheel on when your mates have already set off. We've all been there.... Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel isn't falling off. Benefit from the increased clearance without a lever in the way getting wacked by trailside debris!

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

- LEV has always represented the latest technology but is already a classic among top contending dropper posts. - With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.

- LEV INTEGRA'S internally routed cable significantly cleans up the look of your bike. - With shifter cables, brake lines and lock out cables clamped and zip tied to your carbon fiber piece of art, mountain bike frames have begun to look like an IT guy's fantasy. - Clear the clutter while benefiting from legendary LEV technology – now available in 175mm travel.

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it. - Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force - No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant - Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance - Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

- Comfortable ride - Classic colors

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

- 9 speed wide range - 11-40t - Steel spider

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Replacement piston and seals for Hope disc brake calipers.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

The Stolen rim strip features 30mm width and 20" diameter. - Material: PVC - Wheel Size: 20" - Rim Strip Width (mm): 30 mm - Adhesive: No

Heavy duty and extra wide PVC rim strips for maximum tube protection.

- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Brass compression olive for Hope hydraulic disc brakes.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Replacement piston and seals for Hope disc brake calipers.

Hope Brake Lever Parts

Replacement piston and seals for Hope disc brake calipers.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

The Gyro G3 upper top plate is designed for use with the G3 detangler.

- Sunlite Cottered Pins

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function